![]() ![]() Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit- enabled Aqara Hub is secured by HomeKit technology.A customer who owns an Apple TV (4th generation or later) with tvOS 10 or later, an iPad with iOS 10 or later, or a HomePod can control HomeKit-enabled accessories away from home and automatically through triggers such as time of day, location, sensor detection, or the action of an accessory.Indicator light status Hub status Yellow light is always on Starting up Yellow light flashes Waiting for network connection Yellow or white light flashes Connecting to network White light is always on Network configurations are not completed within 15 minutes after start-up Purple light flashes Allowed to add the sub-device Indicator light is off Works normally or powered off Depending on the local environment, the indoor transmission distance reaches up to 30 meters between the hub and bridge accessories without barriers, such as walls.To ensure steady communication between the hub and its accessories, it is recommended to install the hub at the center of the area where the accessories are located.Please refer to bridge accessory quick start guide for more details. Īfter the hub is connected, please open the Aqara Home app, go to “Accessories” page and tap “+” in the top right corner, and select the accessory to add to the hub according to instructions. If you failed to add the hub, please press the button on the hub for more than 10 seconds until the yellow light flashes quickly, and then add it again. Please keep the HomeKit code in a safe place in case you need to add the hub again.ģ. ![]() Once it is added successfully, you can check the hub in the Apple Home app. iOS user: Follow the instructions to scan the product box or manually enter the HomeKit code on the hub, and complete the setup.Please open the Aqara Home app, click “+” in the upper right corner, select “Hub M1S” and follow the instructions to complete adding the hub. Keep your phone close to the hub and make sure both of them are connected with the same Wi-Fi network.Ģ.If you are using a dual-band router, please disable the 5 GHz Wi-Fi network.Make sure your mobile phone is connected with 2.4 GHz Wi-Fi network. Plug the hub into the socket and wait until the yellow light blinks quickly. You can then add the hub using the Mi Home app. If you want to use the Mi Home app, please restore the factory settings, and then press the button twice within 10 seconds after you hear the voice prompt “Ready to connect. Scan the QR code, or search for “Aqara Home” in the app store. * For more details about Aqara products, please visit Quick Setup At the same time, it can manage and control smart scenes, and can conveniently control smart devices, such as plug, switch, bulb, curtain and so on. You can also use the Intel Killer Prioritization Engine, Intel Killer Intelligence Engine, and Intel® Killer™ DoubleShot™ Pro tools to further customize your network settings.Aqara Hub M1S is a smart home control center, which connects Zigbee devices to Wi-Fi network. You can also have the Intel Killer Intelligence center automatically switch to the best access point or alert you if there is a better one nearby.įrom the Intel Killer Intelligence Center, you can adjust your quick settings, check recommendations for improving your system, or swap between multimedia and creator modes. While the Intel Killer software automatically connects you to the strongest access points it can, you can also check the Wi-Fi scores of the networks near you. The dashboard gives you a complete view of your computer’s network usage and shows which types of applications and websites are using bandwidth. It adds the ability to analyze, optimize, and control your PC’s networking performance. The Intel® Killer™ Intelligence Center interface is packed with valuable features for gamer and creator PC users. ![]()
0 Comments
Leave a Reply. |